|Material:||Fibreglass Reinforced Plastic||Product Name:||Fibreglass Luggage Trailer/fibreglass Trailer Shell/frp Travel Luggage Trailer/ Motorcycle Cargo Trailer|
|Certificate:||ISO9001||Keyword:||FRP Motorcycle Luggage Trailer|
|Technolgy:||Hand Lay Up, RTM, Vacuum Bag, SMC||Application:||Motorcycle|
|Surface:||Painted Or Gelcoat||Warranty Period:||2 Years|
fiberglass trailer parts,
recreational vehicle accessories
Fiberglass is a widely used material that became popular in trailer field in the past few years. One of the reasons of its relatively recent success is that it has several advantages compared to the steel: it is corrosion-free; it has significant chemical resistance and it is a lightweight material (three times less dense than steel, on average). These benifit make fiberglass suitable for automotive production, where all these advantages are very important.
|Fiberglass content||Density(g/cm²)||Tensile Strength(MPa)||Compressive strength(MPa)|
As the glass fiber plastic content increases, the mechanical properties of FRP composites are correspondingly improved.
In order to reduce the selfweight, nowdays fiberglass material are widely applied in this field. FRP profiles have sufficient rigidity and good impact resistance, those fiberglass body parts can meet the basic safety requirements. The composite GRP has a sufficient hardness and toughness. It can help to remove some effect of the impact or produce a rebound, when the body is slightly bumped.
In the modern world, there are many vehicle parts currently being made of fiberglass, especially sports cars where weigh is crucial. Fiberglass is mainly used in the front and rear bumpers, hoods, doors, and casings. Another area where this material is used is the timing belts and V-belts, where glass strings are impregnated with rubber as
reinforcement, due to the high tensile strength of the fiberglass.
Abrasion resistance is also another advantage of the fiberglass, which is why it is used for the production of brake pads and clutches. Clutch disks are reinforced with woven fiberglass to maintain the integrity of the composite material. Anti-abrasive components which are used frequently are Al2O3, SiC and rarely SiC2. These components are added to the liner, the first of the three layers of the composite.
Usually, the liner consists of up to 85 % of resin, where the anti-abrasive chemicals are mixed, and reinforced with few layers of chop strand mat. The high percentage of resin in the upper layer creates a smooth surface and makes it suitable for manufacturing hoods. This helps maintain low aerodynamic loses.
Adding one layer of C-veil makes an even smoother surface. It is easy to add colors (they are special paints for that purpose) in the resin of the upper layer, and a UV-protection, to keep it for a long period.
Fiberglass bodies for heavy duty truck/frp truck hood/fiberglass truck fender/trailers
Fiberglass FRP truck forklift parts, agriculture construction machinery body parts cover
Lanmon service tenet is regarding the quality of our life. Until now, there is zero complaint and zero compensation. We always provide fiberglass products with the satisfying quality. In general, we strictly control the truck bodies manufacturing process and train every staff to work according to the instruction. Besides, we make the professional assembly and check fixture to confirm the high quality.
Some fiberglass products have complex design and a high precision requirement. In this case, we use the three dimensional spot check to make sure and give customers reassuring body kits. we have motivation and confidence, and we will keep going on the stable development of high quality fiberglass.
At present, Lanmon can provide not only fiberglass bodies but also fiberglass radome, FRP panels, fiberglass tubes, etc. In addition, we can produce carbon fiber reinforced plastic products, such as carbon fiber tubes.
Value Added Services
· In-mold coating, weight reduction, packaging design support, part consolidation, material innovation, prototyping, professional project management
·Plants locatedChina enable JIT delivery and low transportation cost
Quality and Other Certifications
·ISO-9001, ISO/TS-16949 and ISO 14001
· Hood assemblies, Fenders - full, half and quarter, Cowl panels, Roofs – mid, raised, Trim tabs and fairings, Sun visor assemblies, Structural door surrounds, Exterior trim - rocker panels, A-pillars, Air deflectors
Under Hood Panels
· Fan shrouds, Windshield wiper housings (rain trays), Cooling modules, Battery boxes/covers, Engine covers, interior/exterior, Firewalls
· Under ride protectors (under cab/chassis fairings), Door surrounds, Load floors, Trim panels
Contact Person: Ms. Sunny Song